Digitrax N Scale Decoders

    Cherry Creek Hobbies

   Search  You may use product # or Key Words                 View Cart   

HomeDCCDigitrax  |  Digitrax N Scale Decoders  


All item on this page have been either discontinued or replaced with a different item by Digitrax.
So they are no longer available and limited to stock on hand .

  DX-DN143IP N Scale Mobile Decoder__$23.99

QTY___

Limited to stock on Hand (3 In Stock)
DN143IP N Scale Mobile Decoder 1 Amp/1.5 Amp Peak 4 FX3 Functions@0.5 Amp, with integral 8 pin plug.


  DX-SDN144PS N Scale Mobile Decoder With Sound __$39.96

QTY___

Limited to stock on Hand (2 In Stock)
SDN144PS N Scale Mobile Decoder With Sound
Plug N Play Mobile Sound/Motor/Function Decoder with SoundFX™
Preloaded with generic diesel and steam sound schemes
Includes 18mm x 13 mm 8 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (2.0 Amps Peak)
Size 1.22” x 0.40” x 0.11”
31.0mm x 10.27mm x 0.16mm
Installation 8-pin Medium Plug
Function Outputs 4-200mA
Function Type FX3


  DX-DZ143PS 1 Amp Premium Mobile Decoder 4 Function with DCC Medium Plug on Short Harness__$30.36

QTY___

Limited to stock on Hand (1 In Stock)
DX-DZ143PS 1 Amp Premium Mobile Decoder 4 Function with DCC Medium Plug on Short Harness
 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control 28 Step Speed Tables with 256 level resolution for precise control.
Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution. SuperSonic™ motor drive for silent operation.
FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control
Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving.
Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls Decoder Lock equipped
Transponder equipped ready for transponding on your layout. All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.
Decoder Reset CV with or without speed table reset. Motor Isolation Protection prevents damage to your decoder.
Basic, Advanced & UniVersal Consisting 2 Digit and 4 Digit Addressing
Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage


Starter Sets      Command Stations Boosters      Power supplies       Throttles      Universal Panel, IR & Radio Receivers

HO Scale Decoders     HO Scale Sound Decoders     Stationary Decoders      Function Decoders     N & Z Scale Decoders

LocoNet Cables Testing     LocoNet WiFi Interface     Power Management      Power Xtenders     Detection And Signaling     

Accessories      Computer Control


Digitrax           NCE           TCS Train Control Systems          SoundTraxx         MRC


Home Page      HO SCALE      Track       Couplers     Scenery     DCC     Power packs     Tools     Styrene     Rail Cleaners     Screws     Glues & Lubricants


Our inventory consists of mainly HO model train supplies. We provide model railroaders with a good supply of products at a discount price. We are small in size but are big in service

Contact    Terms &Conditions      Shipping Cost      Map to cchobbies

     Secure Shopping Cart We Accept Visa,  MasterCard, Discover   We Also Accept  I accept payment through PayPal!, the #1 online payment service!

Cherry Creek hobbies      5851 Road 35      Torrington, Wy. 82240  

Copyright .©  Cherry Creek Hobbies September, 2018