View Cart

Home Page

HO SCALE

Ho Scale Track & Couplers

Rail Cleaners

Train sets

Power packs & DCC

Catalog 

Scenery

MAP

Cherry Creek Central

Shipping Cost

CCHOBBIES LINKS

Terms &Conditions

Email will@cchobbies.com

Plug ‘N Play Mobile Decoder with SoundFX™ for Kato AC4400 HO Locomotives
Preloaded with AC4400 Sound Scheme
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 21mm x 75mm x 2.5mm
Installation Board replacement decoder
Function Outputs 4-200mA
Function Type FX3

Plug ‘N Play Mobile Decoder with SoundFX™ for Kato SD38-2 HO Locomotives
Preloaded with SD38-2 Sound Scheme
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 21mm x 75mm x 2.5mm
Installation Board replacement decoder
Function Outputs 4-200mA
Function Type FX3
 

Features:
Plug ‘N Play Mobile Decoder with SoundFX™ for Kato F40PH HO Locomotives
Preloaded with F40PH Sound Scheme
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 21mm x 75mm x 2.5mm
Installation Board replacement decoder
Function Outputs 4-200mA
Function Type FX3
 

Features:
Wired Mobile Decoder with SoundFX™+Accessory type functions for most HO Locomotives.
Preloaded with selectable steam and diesel Sound Schemes
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Note: The SFX064D has no motor functions and is to be used in conjunction with a standard mobile decoder such as a DH123D etc
Current Rating 1.0 Amp (total)
Size 31mm x 16.7mm x 6.3mm
Installation Wired replacement decoder
Function Outputs 6-250mA (total 800mA)
Function Type FX3
Features Series 3

Features:
Wired Mobile Decoder with SoundFX™ can be installed in almost any HO Locomotive
Preloaded with generic diesel and steam sound schemes
Includes 28 mm 32-Ohm Speaker & 330uF Capacitorr
Current Rating 1.0 Amp (2.0 Amps Peak)
Size 1.273" x 0.67" x 0.25"
32.4 mm x 16.9mm x 6.3 mm
Installation Wired Decoder
Function Outputs 6-200mA
Function Type FX3

Features:
Wired Mobile Decoder with SoundFX™+Accessory type functions for most HO scale Locomotives

Preloaded with selectable steam and diesel Sound Schemes
Includes 28mm 8 Ohm Speaker & 330uF Capacitor
Please Note: The SFX0416 has no motor functions and is to be used in conjunction with a standard mobile decoder such as a DH123D etc.
Regarding N Scale applications:
Although the SFX0416 decoder PCB is physically small enough to fit into many types of N Scale rolling stock and dummy locomotives, for N Scale applications the standard 28mm speaker would have to be replaced with a smaller device.
Finally, the SFX0416 is an 'add-on' type sound decoder, meaning it traditionally works with a standard DCC motor decoder in locomotive applications. N-Scale locomotives generally do not have the necessary space for both the SFX0416 and a motor decoder, as suitable for these applications.
Current Rating 1.0 Amp (total)
Size 31mm x 10.6mm x 5.3mm
Installation Wired replacement decoder
Function Outputs 6-250mA (total 800mA)
Function Type FX3
Features Series 3

$21.59

$21.59

The DH165A0 is a  6 function FX3 decoder is designed to fit Athearn Genesis, Kato, Stewart, Atlas & Other HO Locomotives 1.5/2 amp rated unit. FX3 accessory function outputs rated at .5 amps

$21.59

$21.59

$22.39

$21.59

Digitrax SFX004 Soundbug Modules

TDigitrax Soundbug Modules:
Are Plug N’ Play with any 165 series decoder
Have Smart Power Management - no more
booster or programmer shutdowns!
Can function as a standalone Stationary
Track-side/Under-layout sound decoder
With Fully customizable Digitrax SFX sound capability
Includes 28mm 32 Ohm Speaker & 330uF Capacitor

$36.99

PR2 SoundFX Decoder Programmer

$79.96

Digitrax PR2 Programmer comes with:
PR2
SoundLoader Software
Installation CD and instructions
Cables needed to hook up to a 25 or 9 pin PC Serial port (USB adapters can also be used).
In addition, you’ll need:

A 12-15V DC Power Supply (Digitrax recommends the PS12)
A PC Computer running Windows XP with SoundLoader or equivalent program running
An isolated programming track section (You won’t need a “power booster” to increase programming track voltage.)