Digitrax Retired Products HO Scale                                          Search  You may use product # or Key Words 

    Cherry Creek Hobbies                         View Cart   

HomeDCCDigitrax  |  Digitrax  Decoders Close Out   


All item on this page have been either discontinued or replaced with a different item by Digitrax.
So they are no longer available and limited to stock on hand .

   DX-SDH104K1A+FN04K1 Combo__  $19.99
QTY___

Limited to stock on Hand (2 In Stock)
Fits Kato AC4400 units
Board Replacement SoundFX decoder for Kato AC4400 HO Locomotives Preloaded with AC4400 Sound Scheme.
Plug ‘N Play Mobile Decoder with SoundFX™ for Kato AC4400 HO Locomotives
Preloaded with AC4400 Sound Scheme
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (1.3 Amps Peak)


   DX-SDH104K1B+FN04K1 Combo __  $19.99

QTY___

Limited to stock on Hand (4 In Stock)
Plug ‘N Play Mobile Decoder with SoundFX™ for Kato SD38-2 HO Locomotives
Preloaded with SD38-2 Sound Scheme
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 21mm x 75mm x 2.5mm
Installation Board replacement decoder
Function Outputs 4-200mA
Function Type FX3


  DX-SDH104K1C+FN04K1 Combo __  $19.99

QTY___

Limited to stock on Hand (3 In Stock)
Features:
Plug ‘N Play Mobile Decoder with SoundFX™ for Kato F40PH HO Locomotives
Preloaded with F40PH Sound Scheme
Includes 28mm 32 Ohm Speaker & 330uF Capacitor
Current Rating 1.0 Amp (1.3 Amps Peak)
Size 21mm x 75mm x 2.5mm
Installation Board replacement decoder
Function Outputs 4-200mA
Function Type FX3


  DX-DH163KO Ho Decoder For Kato__$9.99

QTY___

Limited to stock on Hand (5 In Stock)
DH163K0 fits many Kato HO Diesel Locomotives.
Current Rating 1.5 Amp (2.0 Amps Peak)
Size 2.877” x .667” x .173” with .5” stiff wires on each end
73mm x 16.9mm x 4.4 mm with 12.7mm stiff wires on each end
Installation Board Replacement
Function Outputs 6.500mA
Function Type FX3


  DX-DM-1 DC Motor Adapter__$5.99

QTY___

Limited to stock on Hand (2 In Stock)
4The DM-1 is an inline adapter designed to modify any DS54 output
to provide the bi-polar drive current needed to run reversible DC motors,
solenoid switches (like Kato & LGB turnouts), lamps and other similar
devices that draw up to 1/2 amp.
Just plug the DM-1 into any DS54 output and the DM-1 socket will provide a
bipolar drive rated at 500MA continuous and 1 amp surge. DS54 Has been Discontinued


Digitrax DCC

Starter Sets          Boosters     Power Supplies       Throttles      Universal Panels IR & Radio Receivers       Ho Scale Decoders     N & Z Scale Decoders  

 Stationary Decoders        Function Decoders     Sound Decoders     Power Management         Computer Control      Detection & Signaling       Accessories


Brands of DCC stocked at Cherry Creek Hobbies

Digitrax           NCE           TCS Train Control Systems          SoundTraxx         MRC


Home Page      HO SCALE     Couplers      DCC   Glues & Lubricants      Lights Electrical     Power packs

     Rail Cleaners    Styrene     Scenery    Screws      Track       Tools     Train Sets


Our inventory consists of mainly HO model train supplies. We provide model railroaders with a good supply of products at a discount price. We are small in size but are big in service

Contact    Terms &Conditions      Shipping Cost      Map to cchobbies

     Secure Shopping Cart We Accept Visa,  MasterCard, Discover   We Also Accept  I accept payment through PayPal!, the #1 online payment service!

Cherry Creek hobbies      5851 Road 35      Torrington, Wy. 82240          Phone (307) 532-4253

Information on this site is accurate to our knowledge but is presented without warranty.  

We reserve the right to correct errors and change prices without  notice.

Copyright .© Will Garrelts
 Cherry Creek Hobbies 2013