|
Digitrax DCC |
|
HO Scale Mobile Decoders |
 |
DH123D HO Scale Mobile Decoder
$15.99
Current Rating 1.5 Amp (2.0 Amps Peak)
Size .66” x 1.2” x 0.25”
16.76mm x 30.4mm x 6.35mm
Installation Digitrax 9 pin to wires
Function Outputs 2-125mA
Function Type FX3 |
 |
DH123AT HO Scale Mobile Decoder
$19.99
Current Rating 1.5 Amp (2.0 Amps Peak)
Size .66” x 1.2” x 0.25”
16.76mm x 30.4mm x 6.35mm
Installation Digitrax 9 pin to Athearn Standard HO Loco
No-Solder installation
Function Outputs 2-125mA
Function Type FX3 |
 |
DH123P
HO Scale Mobile Decoder
Affordable
Basic HO Plug ‘N Play Decoder.
Decoder Lock equipped
$18.40 |
|
|
DH123PS
HO Scale Mobile Decoder $18.40 |
 |
DH163D HO Scale Mobile Decoder
$23.99
Current Rating 1.5 Amp (2.0 Amps Peak)
Size .67” x 1.05” x 0.25”
16.9mm x 26.6mm x 6.35mm
Installation Digitrax 9 pin to wires
Function Outputs 6.500mA
Function Type FX3 |
|
No
Photo |
DH163AT Ho Decoder With Athearn Harness
$27.99
Series 3
HO No Solder Installation for Athearn Standard Locomotives
Current Rating 1.5 Amp (2.0 Amps Peak)
Size .67” x 1.05” x 0.25”
16.9mm x 26.6mm x 6.35mm
Installation Digitrax 9 pin to Athearn Standard HO Loco
No-Solder installation
Function Outputs 6.500mA
Function Type FX3 |
 |
DH163P
HO Scale Mobile Decoder
Series 3 HO
Plug ‘N Play Decoders
$26.40 |
|
|
DH163PS
HO Scale Mobile Decoder
Series 3 HO
Plug ‘N Play Decoders
$26.40 |
 |
DH465 HO/O Scale Mobile Decoder
High current capacity wired decoder-for
multi-motor HO or O locomotives or hard wired multiple locomotive consists.
Current Rating 4 Amp (6 Amps Peak)
Size 2.04” x 0.67” x 0.11”
51.8mm x 15.24mm x 2.79mm
Installation Wired Decoder
Function Outputs 6-500mA
Function Type FX3
$47.16 |
|
The DH165 series moter and function decoders replace the DH163 series. In
addition to being drop in replacements for the DH163 series, these new
decoders are sound upgradable Using the Digitrax Soundbug . |
|
|
DH165IP HO Scale Mobile Decoder
$21.59 |
 |
DH165L0 HO Scale Mobile Decoder
The DH165L0 is a 6 function FX3 decoder is designed to fit Life-Like locomotives
and others. 1.5/2 amp rated unit. FX3 accessory function outputs rated at .5
amps$21.59 |
 |
DH165A0 HO Scale Mobile Decoder
The DH165A0 is a 6 function FX3 decoder is designed to fit Athearn
Genesis, Kato, Stewart, Atlas & Other HO Locomotives 1.5/2 amp rated unit. FX3
accessory function outputs rated at .5 amps
$21.59 |
 |
DH165K0 HO Scale Mobile Decoder
The DH165K0 is a 6 function FX3 decoder is designed to fit Kato, Stewart, Atlas
& Other HO Locomotives 1.5/2 amp rated unit. FX3 accessory function
outputs rated at .5 amps
$21.59 |
 |
DH165K1A HO Scale Mobile Decoder
The DH165K0 is a 6 function FX3 decoder is designed to fit Kato SD40-2
locomotives and others. 1.5/2 amp rated unit. FX3 accessory function
outputs rated at .5 amps
$22.39 |
 |
DH165Q1 HO Scale Mobile Decoder
DH165Q1 fits Atlas, Intermountain, LifeLike & Other factory sound-equipped HO
Locomotives.
Decoder Lock equipped
Current Rating 1.25 Amp (2.0 Amps Peak)
Size 2.877” x .667” x .173” with .5” stiff wires on each end
73mm x 16.9mm x 4.4 mm with 12.7mm stiff wires on each end
Installation Board Replacement
Function Outputs 6.500mA
Function Type FX3
Features Series 3$21.59 |
|
Wiring Harness |
 |
DHWH Wiring Harness (5pack)
$12.00 |
|
|
DHWHP DH Wiring Harness With NMRA
Plug
$4.80 |
|
|
DHWHPS DH Short Wiring Harness
With NMRA Plug
$4.80 |
|
Function Decoders |
 |
TL1 Single DCC Function Decoder with Integrated Transponder
$13.56
Your TL1 can be used as:
1. Function only DCC decoder with transponding
2. Digitrax Transponder
3. Function only DCC decoder without transponding.
Single 125mA (250mA peak) function output for lights or other functions
Function can be turned on/off using F0, F1, F2, F3, or F4
Supports both 2 digit and 4 digit addressing
Programmable from DCC compatible equipment
Configurable Strobe feature lets you simulate flashing lights like FRED,
Strobes, Mars Lights, etc.
Compatible with Digitrax DCC Transponding Systems
Approximate size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm) |
 |
TF4 Quad DCC Function Decoder with Integrated Transponder
$16.76
Four 125mA (250mA peak) function output for lights or other functions
Functions can be turned on/off using F0-F12
Supports both 2 digit and 4 digit addressing
Programmable from DCC compatible equipment
Configurable Strobe feature lets you simulate flashing lights like FRED,
Strobes, Mars Lights, etc. on the yellow and white leads
Standard On/Off Function operation available on green & violet leads.
Compatible with Digitrax DCC Transponding Systems
Approximate size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm) |
|
Check out great prices on close out ho scale
Decoders
Click here |
